![]() ![]() Once you are sure that the specs support VMDirectPath, you should double-check that the features are enabled in the BIOS. Drives: 8x Hitachi 7,200rpm 2TB, 2x Western Digital Green 2TB, 6x Seagate 1.5TB 7,200rpmįirst, make sure that your CPU and motherboard support Intel VT-d or AMD IOMMU.Memory: 2x 4GB kits of Kingston ECC 1333MHz DDR3 KVR1333D3E9SK2/4G (Unbuffered).Before embarking on this process, please note that the server will need to be restarted mid-process so this is not something that should be done on an ESX host with critical virtual machines running on the host. It is a fairly simple process, so I figured I would provide a quick guide. This is especially useful when one either needs direct RAID controller/ HBA access for an operating system which is recommended for OpenSolaris/ FreeBSD solutions or USB access for an OS installation. Oftentimes people talk about passing a RAID controller/ HBA/ USB drive through to a guest OS in VMware ESXi (this guide is based on 4.1 and works for ESX too) using VMDirectPath I/O or disk through disk in Microsoft Hyper-V. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |